Unit 3: Code Quick Reference
E/Pro Programming Reference
3-18 PN: 9001096E
RDabb,ccc,ddd,nn...n Font Type. Specifies the internal AGFA raster fonts.
a = F: Specifies Futura font
P: Specifies CG Palcio font
S: CG Century Schoolbook font
G: CG Triumvirate Condensed font
V: CG Univers font
t: CG Times font
bb = 0: No character set
1: ISO 8859/1 Latin1
2: ISO 8859/2 Latin2
3: ISO 8859/9 Latin5
4: CP-737 DOSGreek
5: CP-885 DOS Cyrillic
6: CP-864 DOSArabic
8: PC-850 Multilingual
ccc = Horizontal Size (16 to 999 dots or P08 to P72 point size)
ddd = Vertical Size (16 to 999 dots or P08 to P72 point size)
nn..n = Data to be printed
REa Telegraphic Message End Specification. Specifies the telegraphic message end relative to
small labels. Only applicable to the M10e printer.
a = Operates when ending
0: Discharge motion
1: Discharge motion + Cut motion
RFabn...n Recall and Print of Font & Logo. Calls and prints font and logo downloaded with Label
Gallery’s “GalleryMemMaster”.
a = Font ID number (01 to 99)
b = Print digit (1 to 9999)
n= Print data
RI Label Size Specification. Specifies label dimensions. Only applicable to the M10e printer.
a
= Sheet width (1500 to 3200 dots)
b
= Sheet length (480 to 3600 dots)
c
= Label width (0 to 60 dots)
d
= Label length (00 to 60 dots)
e
= Small label width (480 to 3200 dots)
f
= Small label length (480 to 3600 dots)
g
= Label width quantity (01 to 06)
h
= Label length quantity (01 to 07)
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
To Next Page
Loading...
