Programming Manual 3. Command Code Quick Reference
SATO RISC Printers 119
3. Command Code Quick Reference
3.1 Instruction
A Start Code. Begins all print jobs.
A(space)Z Form Feed. Feeds a blank tag or label.
AR Normal Print Length. This command resets the prin-
ter to the Standard print length (7 inches).
AX Expanded Print Length. This command sets the prin-
ter to the Expanded print length (14 inches).
A3H-aaaa
Vbbbb Base Reference Point. Establishes a new base refe-
rence point position in dots for the current label. Units
of measurement are dots.
Babbcccd Bar Codes. Prints a 1:3 ratio bar code.
a = 0 Codabar
1Code39
2 Interleaved 2 of 5 (I 2/5)
3 UPC-A/EAN-13
4EAN-8
5 Industrial 2 of 5
6Matrix2of5
7 reserved
8 reserved
9 reserved
AMSI
B reserved
CCode93
D reserved
EUPC-E
FBookland
GCode128
I UCC 128
bb = Number of dots (01-12) for narrow bar and nar-
row space
ccc= Bar height in dots (001-600)
d = UCC 128 only
0 No human readable text
1 Human readable at top
2 Human readable at bottom
To Next Page
Loading...
