SATO CL408 - Data Matrix, Print Data

154 SATO RISC Printers
4. Bar Code Specifications Programming Manual
Two-Dimensional Bar Codes
Data Matrix, Print Data
Command Structure:
<ESC>DCxx...x
xx...x: Data, maximum of 500 characters
Example: <ESC>DC00006000
Placement: Immediately following the <ESC>BC Data Format de-
signation command or the <ESC>FX Sequentia Num-
bering command.
Default: None
Function:
To print a Data Matrix two-dimensional bar code image on a label.
Input:
<ESC>A
<ESC>%0<ESC>V0100<ESC>H0100<ESC>BX05051010000000001
<ESC>DCDATA MATRIX DATA MATRIX
<ESC>Q1<ESC>Z
Output:
Note:
1. The maximum amount of data that can be printed with this com-
mand is 500 characters.
2. If an <ESC>BX Data Format designation command contains any
parameters out of the valid range, no symbol will be printed when
this command is sent.