SATO CL408 - Maxicode Vers. 3

Programming Manual 4. Bar Code Specifications
SATO RISC Printers 157
Two-Dimensional Bar Codes
Maxicode Vers. 3
Command Structure:
<ESC>BVa,b,c,ddddddddd,eee,fff,DDD
a: Symbol Number 1 - 8
b: Number Symbol 1 - 8
c: Mode 2: Structured Carrier Message
3: Structured Carrier Message
4: Standard Symbol
6: Reader Programming
ddd..d: Postal Code
ee...e: Country Code
fff: Service Class
DDD: Data Message (Do not enter Null Code!)
Function:
To print a Maxicode two-dimensional bar code image on a label.
Input:
<ESC>A<ESC>V0100<ESC>H0100
<ESC>BV1,1,2,152382802,840,001
[)><RS>01<GS>951Z00004951<GS>UPSMAXICODE
<GS>06X610
<GS>UPS<GS>PA<RS><EOT>
<ESC>Q1<ESC>Z
Output:
Note:
1. The Secondary Message field (ee...e) must contain exactly 84
characters. If a smaller message is specified, the field must be
padded with “exclamation point” character(s).
2. <Rs> represents Hex 1E, <Gs> represents Hex 1D, <Eot> repre-
sents Hex 04, <ESC> represents Hex 1B and <Sp> represents Hex
20.