SATO CL408 - 8 Custom Characters and Graphics; Custom-Designed Character Example

Programming Manual 8. Custom Characters And Graphics
SATO RISC Printers 201
8. Custom Characters And Graphics
8.1 Custom-designed Character Example
The following example is presented to help understand the use of the
Custom-Designed Characters command. It demonstrates the design and
printing of an “arrow” in a 16 x 16 matrix.
1. Determine which matrix size to use
• 16 dot x 16 dots
• 24 dots by 24 dots
2. Lay out a grid and draw the image on the grid.
• Each square represents one dot
• Blacken squares for each printed dot