Programming Manual 4. Bar Code Specifications
SATO RISC Printers 147
UPC-E
Command Structure:
<ESC>BEbbccc (data)
<ESC>DEbbccc (data)
bb: Width of narrow element in dots (01-03)
ccc: Bar height in dots (001-600)
(data): Bar code data (numeric); must be exactly 6 digits
Character Set:
0-9 (numeric only)
Density table:
Input:
<ESC>H0400<ESC>V0550<ESC>DE03100123456
<ESC>H0375<ESC>V0600<ESC>OB0
<ESC>H0408<ESC>V0655<ESC>OB123456
Output:
Note: Command DE provides guide bars that extend longer than
therestofthebarcode.
Printer
Resolution
Value of “bb” Narrow Bar
Width
(mils)
Magnification
Factor
12 dot/mm
02 6.7 Below Minimum
03 10.0 75%
04 13.0 100%
8 dot/mm
02 10.0 75%
03 15.0 112%
04 20.0 150%
To Next Page
Loading...
