SATO CL408 - Rotate, Fixed Base Reference Point; Command Structure; Special Notes

76 SATO RISC Printers
2. Command Codes Programming Manual
Print Position
Command Structure:
Horizontal Position <ESC>Haaa
Vertical Position <ESC>Vbbb
aaaa: Number of dots horizontally from the base reference
point (1 to maximum)
bbbb: Number of dots vertically from the base reference point
(1 to maximum)
Example: <ESC>H0020<ESC>V0150
Placement: Preceding any printed field description of lines/boxes,
fonts, bar codes or graphics.
Default: <ESC>H0001
<ESC>V0001
Function:
The Horizontal and Vertical commands specify the top left corner of a
field or label, using the current base reference point as an origin. They
also establish a reference point for subsequent fields until the next ho-
rizontal and/or vertical print position command is issued.
Input:
<ESC>A
<ESC>H0025<ESC>V0050<ESC>L0303<ESC>MM-8400RV
<ESC>H0100<ESC>V0150<ESC>MM-8400RV
<ESC>Q1<ESC>Z
Output: