140 SATO RISC Printers
4. Bar Code Specifications Programming Manual
Industrial Two of Five
Command Structure:
1:3 ratio: B5bbccc (data)
2:5 ratio: BD5bbccc (data)
1:2 ratio: D5bbccc (data)
bb: Width of narrow element in dots (01-12)
ccc: Bar height in dots (001-600)
(data): Bar code data (numeric); must be an even number of
digits or else the printer will add a leading zero
Character Set:
0-9 (numeric only)
Input:
<ESC>H0100<ESC>V0600<ESC>BD50310012345
<ESC>H0300<ESC>V0710<ESC>XS12345
Output.
Note: To add horizontal guard bars to the top and bottom of the
bar code, use the Line and Box command.
To Next Page
Loading...
