84 SATO RISC Printers
2. Command Codes Programming Manual
Reverse Image
Command Structure:
<ESC>(aaaa,bbbb
a: Horizontal length in dots of reverse image area
b: Vertical height in dots of reverse image area.
See Note 6 for field ranges
Example: <ESC>(100,50
Placement: Thiscommandmustbeprecededbyallotherdataandbe
placed just before <ESC>Q
Default: None
Function:
Toreverseanimageareafromblacktowhiteandviceversa.Usethe
Print Position commands (<ESC>H and <ESC>V) to locate the top left
corner of the reverse image area.
Input:
<ESC>A
<ESC>H0050<ESC>V0120<ESC>L0202<ESC>WB1REVERSE
<ESC>H0250<ESC>V0300<ES C>L0202<ESC>WB1HALF
<ESC>H0040<ESC>V0110<ESC>(370,100
<ESC>H0240<ESC>V0290<ESC>(220,47
<ESC>Q1<ESC>Z
Output:
Note:
1. A reverse image area is affected by the rotate commands. There-
fore, always assume the printer is in the normal print orientation
when designing and sending the Reverse Image command...
To Next Page
Loading...
