SATO CL6NX Service Manual

2 Operation and Configuration
21
CL4NX/CL6NX Service Manual
Clone
Tools > Service > Clone
Save the setting information of the printer to USB memory.
Available only if you have installed the USB memory.
You can duplicate (copy) the setting information stored in the USB memory
to other printers.
The operation procedures are as follows:
Duplicating the setting information of the printer to USB memory
1. Insert the formatted USB memory into the USB connector.
2. Select Clone in the Service menu.
3. Press the right soft button to start to duplicate the setting information.
Press the left soft button to cancel the duplication.
Duplicating the setting information of the printer stored in the USB
memory to other printers
1. Power on the printer that you want to duplicate the setting information.
2. Connect the USB memory with setting information to the USB
connector of the printer.
3. Press the right soft button to start to duplicate the setting information.
4. When the duplication of the setting information completes, the printer
reboots automatically.
5. Remove the USB memory from the printer.
Note
You can use both front and rear USB connectors (Type A).
Printer Serial
Tools > Service > Maintenance > Printer Serial
Manually enter the serial number of the printer after replacing the main
(CONT) PCB.

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g