SATO CL6NX - Page 302

[Network]
302
The IP address should normally be set to 0.0.0.0 (the default value). It means that the global NTP
servers will be assigned automatically. Set to a valid IP if the time synchronization is requested for a
specific server.
[LPD]
Set the functions for LPD.
The setting items are as follows:
Enable
Enable or disable the LPD function.
DNS Lookup
Enable or disable the DNS Lookup function.
[Enable]
Enable or disable the LPD function.
The options are as follows:
Enabled
Enable the LPD function.