SATO CL6NX - Page 304

[Network]
304
FTP Timeout
Set the connection timeout period between the printer's FTP server and clients.
[Enable]
Enable or disable the functions for FTP.
The options are as follows:
Enabled
Enable the FTP function.
Disabled
Disable the FTP function.
[FTP Timeout]
Set the connection timeout period between the printer's FTP server and clients.
Specify the maximum number of seconds that the printer's FTP server will allow clients to stay
connected without receiving any data on either the control or data connection.
The setting range is from 10 to 3600 seconds.