SATO CL6NX - Page 335

335
Next Update
Shows the print distance of the print head or the number of cut times of the cutter for the next
periodic notification.
◦ Appears only if you have selected [Counter] in the [Type] menu.
Current Value
Shows the current print distance of the print head or the current number of cut times of the cutter.
◦ Appears only if you have selected [Counter] in the [Type] menu.
Notifications
Specifies the number of periodic notifications to be sent per day.
◦ Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you
have selected [Daily] in the [Type] menu.
Weekday
Specifies the day of the week to perform the periodic notification.
◦ Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you
have selected [Weekly] in the [Type] menu.
Day
Sets the date to perform the periodic notification.
◦ Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you
have selected [Monthly] in the [Type] menu.
Time 1
Specifies the time to perform the first periodic notification.
◦ Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you
have selected [Daily] in the [Type] menu.
Time 2
Specifies the time to perform the second periodic notification.
◦ Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you
have set [Daily] in the [Type] menu and have set twice or more in [Notifications].
Time 3
Specifies the time to perform the third periodic notification.
◦ Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you
have set [Daily] in the [Type] menu and have set three times in [Notifications].
Time
Specifies the time of the specified day or date to perform periodic notifications.