SATO CL6NX - Page 338

[Network]
338
[Cuts] (SOS users only)
Specifies the number of cut times of the cutter for the timing to perform the periodic notification. You
will be notified for each number of cut times you specify.
Appears only if you have set [Counter] with [Cutter] in the [Type] menu.
The setting range is from 1 to 1000000.
[Notifications] (SOS users only)
Specifies the number of periodic notifications to be sent per day.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Daily] in the [Type] menu.
The setting range is from 1 to 3.