337
[Counter] (SOS users only)
You can select the counter for the print head or cutter for the timing to perform the periodic notification.
Appears only if you have selected [Counter] in the [Type] menu.
Advanced setting items or measured values appear on the [Periodic Notification] menu according to
the selected options.
The options are as follows:
• [Head]
• [Cutter]
[Meters] (SOS users only)
Specifies the print distance of the print head for the timing to perform the periodic notification. You will
be notified for every meter you specify.
Appears only if you have set [Counter] with [Head] in the [Type] menu.
The setting range is from 1 to 100000.
To Next Page
Loading...
