[RFID] (CL4NX only)
374
[Non-RFID Warning]
Set whether to warn the use of an RFID tag by mistake if RFID command is not used.
The options are as follows:
Enabled
Shows the non-RFID warning upon error.
Disabled
Ignore the non-RFID error.
With Non-RFID warning enabled and RFID tag loaded, if the items received do not contain an RFID
issue command, a warning error appears before printing so that the RFID tag will not be wasted.
Press the button (CANCEL) to clear the warning message.
To Next Page
Loading...
