SATO CL6NX - Page 442

[Notifications]
442
[Change Platen]
Notify when the platen roller needs to be replaced.
The setting items are as follows:
Change Platen
Enable or disable the notification function about when the platen roller needs to be replaced.
Platen Interval
Set the notification interval about when the platen roller needs to be replaced.
Platen Count
Shows the current distance the platen roller has fed.
[Change Platen]
Enable or disable the notification function about when the platen roller needs to be replaced.
The options are as follows:
Enabled
Enable the notification function.