SATO CL6NX - Page 465

465
• The data files of the receive buffer are created for each type of interface.
• The details of the file created inside "buff/" of the printer are as follows:
BT0001.bin
The contents of the receive buffer for Bluetooth.
LAN0001.bin
The contents of the receive buffer for LAN.
LPT0001.bin
The contents of the receive buffer for IEEE1284.
NFC0001.bin
The contents of the receive buffer for NFC.
PIPE0001.bin
The contents of the receive buffer for pipe.
SCI0001.bin
The contents of the receive buffer for RS-232C.
USB0001.bin
The contents of the receive buffer for USB.
WIFI0001.bin
The contents of the receive buffer for wireless LAN.
• If you perform the [Buffer Dump] again, the existing file will be overwritten.
[Log Files]
The setting items are as follows:
Copy
Copy the log files of the printer to the USB memory.
◦ Available only if you have installed the USB memory.