[HEX-Dump]
466
Remove
Delete the log files of the printer.
Print
Print a hex dump of the log files of the printer.
[Copy]
Copy the log files of the printer to the USB memory.
Available only if you have installed the USB memory.
• Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
The procedure to copy the log files is as follows:
1.
Select the file type to copy and press the button.
◦ buff/
The buffer data saved after you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
To Next Page
Loading...
