SATO PW208NX - Page 102

Starting Up the Printer
99
Mobile printer PW208NX/PW208mNX
Notications
System > Notications
To set up the function to notify the timing of cleaning and parts replacement, the
setting items are as follows:
1 Clean Head Notify when the print head needs to be cleaned.
2 Change Head Notify when the print head needs to be replaced.
3 Change Platen Notify when the platen roller needs to be replaced.
Clean Head
System > Notications > Clean Head
To notify when the print head needs to be cleaned, the setting items are as follows:
1 Clean Head Enable or disable the notication function about when the
print head needs to be cleaned.
2 Head Interval Set the notication interval about when the print head
needs to be cleaned.
You can change settings only if you have selected
Enabled in the Clean Head.
3 Head Counter Shows the current print distance.
You cannot change the setting.
Clean Head
System > Notications > Clean Head > Clean Head
Enable or disable the notication function about when the print head needs to be
cleaned.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : Enable the notication function.
Disabled : Disable the notication function.