SATO PW208NX - Page 105

102
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Platen Interval
System > Notications > Change Platen> Platen Interval
Set the notication interval about when the platen roller needs to be replaced.
When the print distance after the counter is reset reaches to the set value, a status
icon for notications is displayed.
You can change settings only if you have selected Enabled in the Change Platen>
Change Platen.
Initial value : 30 km
Setting range : 1 to 30 km
Note
For details on notications, see “3.4 Notications” (

page 139).
Sound
System > Sound
Set the buzzer sound.
1 Error Sound Set the buzzer volume for the error sound.
Error Sound
System > Sound > Error Sound
Set the buzzer volume for the error sound.
Initial setting : Enabled
Setting options : Enabled, Disabled