SATO PW208NX - Page 119

116
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Print
Tools > HEX-Dump > Log Files > Print
Print the les of the received data as follows:
1. Select the le type you want to print.
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the le you want to print.
Select
Tools > Reset > Select
To select the items to be initialized, the items are as follows:
1 Data Initialize the data saved in the printer.
2 Data & Set. Initialize the data and setting values of the printer.
3 Settings Initialize the setting values of the printer.
It is generally not necessary to perform the initialization. Doing so could
change the print conditions.
Data
Tools > Reset > Select > Data
Initialize the data saved in the printer.
The data to be initialized are the fonts and graphics registered in the printer.