SATO PW208NX - Page 118

Starting Up the Printer
115
Mobile printer PW208NX/PW208mNX
Buffer Dump
Tools > HEX-Dump > Buffer Dump
Save the receive buffer data to the buff/ folder of the printer.
Buffer dump is available only if you have set the Hex Dump Mode to Disabled.
Notes
• The data les of the receive buffer are created for each type of
interface.
• The details of the le created inside buff/ are as follows:
• BT0001.bin: Received data through Bluetooth.
• WIFI0001.bin: Received data through wireless LAN.
• USB0001.bin: Received data through USB.
• If you perform the Buffer Dump again, the existing le is overwritten.
• You can print or delete les from the Log Files menu.
Log Files
Tools > HEX-Dump > Log Files
To manage the les of the received data created in the HEX-Dump mode and Buffer
Dump, the setting items are as follows:
1 Remove Delete the les of the received data.
2 Print Print les of the received data.
Remove
Tools > HEX-Dump > Log Files > Remove
Delete the les of the received data as follows:
1. Select the le type you want to delete.
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the le you want to delete.