SATO PW208NX - Page 128

Starting Up the Printer
125
Mobile printer PW208NX/PW208mNX
Setting Items Initial Setting/Value User Reset Factory Reset
WPA Conf. – – –
WPA Authentication Personal (PSK) Yes/comm
*
Yes/comm
*
EAP Conf. – – –
EAP Mode FAST Yes/comm
*
Yes/comm
*
Inner Method MSCHAPv2 Yes/comm
*
Yes/comm
*
Inner Method MSCHAPv2 Yes/comm
*
Yes/comm
*
Inner Method MSCHAPv2 Yes/comm
*
Yes/comm
*
Username – Yes/comm
*
Yes/comm
*
Anon.Outer ID – Yes/comm
*
Yes/comm
*
Verify Server Cert. Enabled Yes/comm
*
Yes/comm
*
PAC Auto Provisioning Disabled Yes/comm
*
Yes/comm
*
Services – – –
Port – – –
Port1 1024 Yes/comm
*
Yes/comm
*
Port2 1025 Yes/comm
*
Yes/comm
*
Port3 9100 Yes/comm
*
Yes/comm
*
Flow Control Status4 Yes/comm
*
Yes/comm
*
LPD Enabled Yes/comm
*
Yes/comm
*
DNS Lookup Disabled Yes/comm
*
Yes/comm
*
FTP Disabled Yes/comm
*
Yes/comm
*
FTP Timeout Disabled Yes/comm
*
Yes/comm
*
Advanced – – –
ARP Announce – – –
Additional Enabled Yes/comm
*
Yes/comm
*
Periodic 300 sec. Yes/comm
*
Yes/comm
*
*: These settings and values of communications settings in usable status are not reset when performing
Factory reset.