SATO PW208NX - Page 57

54
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
DarknessRng (Darkness Range)
Printing > DarknessRng
Set the darkness of the characters and graphics.
Initial setting : A
Setting options : A, B, C, D, E, F
Note
The normal setting is A. You can also select B to F but the print darkness
does not change.
Darkness
Printing > Darkness
Set the darkness of the characters and graphics.
Initial value : 5
Setting options : 1 to 10
Note
1 is the lightest and 10 is the darkest.
Imaging
Printing > Imaging
To set print reference position in the vertical and horizontal directions, the setting
items are as follows:
1 Vertical Offset the print position in the vertical (feed) direction.
2 Horizontal Offset the print position in the horizontal direction.
Media feed direction
Printing position
Printing
position after
adjustment
Horizontal direction
80 dots (10 mm)
Vertical
direction
40 dots
(5 mm)
ABC
Horizontal
direction (–)
Horizontal
direction (+)
Media feed direction
Vertical direction (+)
Vertical direction (–)