SATO PW208NX - Page 74

Starting Up the Printer
71
Mobile printer PW208NX/PW208mNX
IP Address
Interface > Network > Settings > Wi-Fi > IPv4 > IP Address
If you have selected DHCP in the Mode menu or Wi-Fi Direct is active, the IP address
you received from the DHCP server is displayed on the screen.
If you have selected Static in the Mode menu, set the IP address.
Initial setting : 000.000.000.000
Setting range : 000.000.000.000 to 255.255.255.255
Netmask
Interface > Network > Settings > Wi-Fi > IPv4 > Netmask
If you have selected DHCP in the Mode menu or Wi-Fi Direct is active, the subnet
mask address you received from the DHCP server is displayed on the screen.
If you have selected Static in the Mode menu, set the subnet mask address.
Initial setting : 255.255.255.0
Setting range : 128.0.0.0 to 255.255.255.254
Gateway
Interface > Network > Settings > Wi-Fi > IPv4 > Gateway
If you have selected DHCP in the Mode menu or Wi-Fi Direct is active, the default
gateway address you received from the DHCP server is displayed on the screen.
If you have selected Static in the Mode menu, set the default gateway address.
Initial value : 000.000.000.000
Setting range : 000.000.000.000 to 255.255.255.255