SATO PW208NX - Page 75

72
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
IPv6
Interface > Network > Settings > Wi-Fi > IPv6
To set IPv6 for the wireless LAN, the setting items are as follows:
This item is not displayed when Wi-Fi Direct is selected.
1 Mode Select the IP address assignment method.
2 DHCP
You can press
button to get the IP address from the
DHCP server.
When Mode is set to DHCP, the address is updated.
3 IP Address Shows the IP Address.
You cannot change the setting.
4 Prex Length Display or set the prex length.
If you have selected Static in the Mode menu, the prex length
is selected and set.
5 Gateway Shows the default gateway address.
You cannot change the setting.
6 DNS Shows the primary address of the DNS server.
You cannot change the setting.
Mode
Interface > Network > Settings > Wi-Fi > IPv6 > Mode
Select the IP address assignment method.
Initial setting : Disable
Setting options : Disable , Auto, DHCP, Static
Disable : Disable the IPv6.
Auto : Automatically generate the IP address and gateway
(stateless mode).
DHCP : Automatically retrieve the IP address, gateway and subnet
mask from the DHCP server.
Static : Shows the IP address and default gateway address.
Prex Length
Interface > Network > Settings > Wi-Fi > IPv6 > Prex Length
If you have selected Auto or DHCP in the Mode menu, the prex length is displayed.
If you have selected Static in the Mode menu, the prex length is selected and set.
Initial value
: 64
Setting range : 1 to 128