SATO PW208NX - Page 76

Starting Up the Printer
73
Mobile printer PW208NX/PW208mNX
Proxy
Interface > Network > Settings > LAN > Proxy
To set the proxy for the LAN, the setting items are as follows:
1 Enabled Enable or disable use of proxy.
2 Server Shows the proxy server address information.
You cannot change the setting.
3 Exclude Shows the address to be excluded from the proxy usage.
You cannot change the setting.
WPS
Interface > Network > Settings > Wi-Fi > WPS
To set the wireless LAN connection using the push button or PIN code method, the
setting items are as follows:
This item is not displayed when Wi-Fi Direct is selected.
1 Button (PBC) Set the wireless LAN connection using the push button
method.
2 PIN Set the wireless LAN connection using the PIN code method.
Note
Refer to the manual of the wireless LAN access point device for its
operation.