SATO PW208NX - Page 77

74
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Button (PBC)
Interface > Network > Settings > Wi-Fi > WPS > Button (PBC)
Set the wireless LAN connection using the push button method.
1. Select Button (PBC) in the WPS menu.
2. When “Press AP button.” is displayed on the screen, press the WPS button on the
access point of the wireless LAN device.
3. When the connection to the access point is established, “Successfully congured“
appears on the screen.
Note
If the connection to the access point is failed, “Failed to nd the Access
Point” appears on the screen.
PIN
Interface > Network > Settings > Wi-Fi > WPS > PIN
Set the wireless LAN connection using the PIN code method.
1. Select PIN in the WPS menu.
2. When “Enter PIN on AP.” appears on the screen, enter he PIN code to the access
point of the wireless LAN displayed alternately on the screen.
3. When the connection to the access point is established, “Successfully congured”
appears on the screen.
Note
If the connection to the access point is failed, “Failed to nd the Access
Point” appears on the screen.