Starting Up the Printer
77
Mobile printer PW208NX/PW208mNX
Hidden SSID
Interface > Network > Settings > Wi-Fi > Hidden SSID
Display or set the Hidden SSID (stealth function), when Infrastructure is selected in
the Mode.
Initial setting : Enabled
Setting options : Enabled, Disabled
Enabled: Stop beacon signals.
Disabled: Transmit beacon signals.
Mode
Interface > Network > Settings > Wi-Fi > Mode
Set the communication method of the wireless LAN.
Initial setting : Ad-hoc
Setting options : Infrastructure, Ad-hoc
Infrastructure : Communication is performed via access point infrastructure
mode.
Ad-hoc : Communication is performed in Ad-hoc mode.
Note
When switching the Mode, you need to restart the printer.
Channel
Interface > Network > Settings > Wi-Fi > Channel
Set the communication channel.
Channel can be set only if you have selected Ad-hoc in the Mode menu.
Initial setting : 6
Setting range : 1 to 11
WEP Conf.
Interface > Network > Settings > Wi-Fi > WEP Conf.
To display the WEP authentication if you have selected WEP in the Security menu, the
setting items are as follows:
1 Authentication Shows the WEP authentication method.
You cannot change the setting.
2 Key Index Shows the WEP Key Index.
You cannot change the setting.
To Next Page
Loading...
