SATO PW208NX - Page 81

78
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
WPA Conf.
Interface > Network > Settings > Wi-Fi > WPA Conf.
Display and set the WPA authentication if you have selected WPA+WPA2 or WPA2 in
the Security menu.
1 WPA
Authentication
Shows the WPA authentication method.
You cannot change the setting.
2 EAP Conf. Shows the functions for EAP only if you have selected
Enterprise (802.1x) or CCKM in the WPA Authentication
menu.
You cannot change the setting.
EAP Conf.
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf.
Interface > Network > Settings > Wi-Fi > EAP Conf.
Shows the functions for EAP only if you have selected Enterprise (802.1x) or CCKM
in the WPA Authentication menu, or if you have selected Dynamic WEP in the Security
menu.
You cannot set the items of EAP Conf.
1 EAP Mode Shows the EAP Mode (authentication mode).
2 Inner Method
Shows the inner method only if you have selected
Fastin the EAP Mode.
3 Inner Method
Shows the inner method only if you have selected PEAP
in the EAP Mode menu.
4 Inner Method
Shows the inner method only if you have selected TTLS
in the EAP Mode menu.
5 Username Shows the EPA authentication user name.
6 Anon.Outer ID Shows the external anonymous ID only if you have
selected FAST, PEAP or TTLS in the EAP Mode menu.
7 Verify Server Cert. Shows whether server authentication is enabled or
disabled only if you have selected FAST, PEAP, TLS or
TTLS in the EAP Mode menu.
8 PAC Auto
Provisioning
Shows whether PAC Auto Provisioning is enabled or
disabled only if you have selected FAST in the EAP
Mode menu.
Services
Interface > Network > Services
To set the port for connection, LPD or FTP, the setting items are as follows:
1 Ports Set the ports numbers.
2 LPD Set up the functions for LPD.
3 FTP Set up the functions for FTP.