82
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Periodic
Interface > Network > Advanced > ARP Announce > Periodic
Set the periodic timing for ARP announcement.
Initial value : 300 sec.
Setting range : 0 to 600 seconds
Note
If you set the item to 0, the interval of announcement is set to off.
USB
Interface > USB
Set the USB connection.
1 Flow Control Set the communication protocol.
Flow Control
Interface > USB > Flow Control
Set the communication protocol.
Initial setting : Status4
Setting options : Status4, None
To Next Page
Loading...
