SATO PW208NX - Page 88

Starting Up the Printer
85
Mobile printer PW208NX/PW208mNX
ISI
Interface > Bluetooth > ISI
Set the ISI communication parameter when Enable is set to Enabled.
Set to a value that is higher than the ISW communication parameter setting value.
Initial setting : 2048
Setting range : 18 to 4096
Notes
• The setting is even only. When you set an odd number, the printer
operates the value of the set odd number minus 1.
• If you set ISI to 0, also set ISW to 0 simultaneously.
• When both ISI and ISW are set to 0, they are not displayed in the device
search from a PC and others.
ISW
Interface > Bluetooth > ISW
Set the ISW communication parameter when Enable is set to Enabled.
Set to a value that is lower than the ISI communication parameter setting.
Setting range varies depending on the ISI communication parameter setting value.
Initial value : 18
Setting range : 0 or 17 to 2048
Notes
• If you set ISW to 0, also set ISI to 0 simultaneously.
• When both ISI and ISW are set to 0, they are not displayed in the device
search from a PC and others.
PSI
Interface > Bluetooth > PSI
Set the PSI communication parameter when Enable is set to Enabled.
Set to a value that is higher than the PSW communication parameter setting value.
Initial value : 144
Setting range : 18 to 4096
Note
The setting is even only. When you set an odd number, the printer operates
the value of the set odd number minus 1.