SATO PW208NX - Page 90

Starting Up the Printer
87
Mobile printer PW208NX/PW208mNX
NFC
Interface > NFC
Set the NFC (Near Field Communication) function if the NFC interface (Optional) is
installed.
The setting items are as follows:
I/F Enable : Enable or disable the NFC interface.
I/F Enable
Interface > NFC > I/F Enable
Enable or disable the NFC Interface.
The setting items are as follows:
Enabled : Enable the NFC interface.
Disabled : Disable the NFC interface.
Note
Even when Disabled is set, the NFC tag setting is in effect.
Ignore CR/LF
Interface > Ignore CR/LF
Ignore or acknowledge the CR/LF code of the received data.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : Ignore the CR/LF code.
Disabled : Do not ignore the CR/LF code.
Ignore CAN/DLE
Interface > Ignore CAN/DLE
Ignore or acknowledge the CAN/DLE code of the received data.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : Ignore the CAN/DLE code.
Disabled : Do not ignore the CAN/DLE code.