Scantron SelfScore - Page 71

Operator’s Guide 61
• End Document = FF
• Compress = 15
• Record Length = FFFF
• Check Char = FF
• Initiate From = CPU
• Initiate Code = 11
• Positive = 11
• Negative = 1A
• X-On = FF
• X-Off = FF
• Start = 72
• Stop = 0E
• Release = 12
• Select Stacker = 1B
• Download = 1C
• Runtime = 1D
• Status = 73
• Scanner Ctrl = 65
• Print Position = 31
• Print Data = 32
• Display Data = 07
• End of Info = 04
• End of Batch = FF
• OCR = 1E
Press Next to skip this function and advance to the
next menu item.
Press Set to set the communications parameters to
the default configuration shown above.
A Comm Config Complete message will display. Press
Next to complete communications configuration and
to exit this submenu.