Schaerer Ambiente 2 - 7.1.3 Problems and troubleshooting; 7.1.3.1 The refrigerator does not work; 7.1.3.2 The refrigerator functions noisily; 7.1.3.3 Refrigerator is not cold enough

Optional Features
BASO-2 - 02.07 - V07 Page 7-5
7.1.3 Problems and troubleshooting
7.1.3.1 The refrigerator does not work
Attention!
Have the link between refrigerator and coffee machine checked only by a ser-
vice technician!
Check whether
- The temperature is set to zero;
- + Capture 7.1.5.2 Set temperature, page.
- The power supply has been cut off;
- The safety switch (FI) in the electrical system is off;
If the refrigerator is not connected to the power supply via the coffee machine, check
whether:
- The mains plug is damaged or not plugged in properly.
Danger!
Do not repair the mains plug!
Inform a service technician or electrician immediately!
7.1.3.2 The refrigerator functions noisily
Check whether
- the refrigerator in particular the chiller is standing flatly;
- the refrigerator is in contact with the surrounding furniture and transfers the
vibrations;
Attention!
- Never open the device!
- Have only a service technician check the cooling pipes at the back of the
device for flushness and vibrations;
7.1.3.3 Refrigerator is not cold enough
Check whether
- The door is properly shut;
- the door seal is intact.
- the inside of the refrigerator is coated with ice. The layer of ice must not be
more than 3 mm thick.
- The refrigerator is near a source of heat;
- The refrigerator or separate refrigerating unit are sufficiently ventilated;
- The evaporator is iced up.
+ Contact your after sales service
Attention!
Check for dust contamination on condensers or rotating fans (in models with forced cool-
ing). Only have this check performed by a service engineer!