Schaerer Ambiente 2

User Instructions
BASO-2 - 02.04 - V07 Page 4-25
4. Press [ ] key.
5. Set the first digit of the new PIN code using keys [ ] and [ ]
6. Confirm by pressing the [
] key.
7. Repeat steps 5 and 6 for each successive digit until the full PIN code is entered.
8. Press
[ ] or [ ] to reach next menu, remove PROGRAM card Î coffee machine
ready in normal operating mode..
 Pressing the [ ] key accepts existing settings.
 The PIN code is only activated if so programmed.
 The current PIN code is not displayed.
 In the event of an incorrect entry, repeat steps 3 to 7.
4.6.2. KEY BLOCK card
The KEY BLOCK card enables you to enable and disable product keys.
4.6.2.1. Menu
- Disable
- Enable
4.6.2.2. Disable keys
1. Insert KEY BLOCK card into the card reader.
2. All of the enabled product keys light up red:
3. Press the product key you wish to disable. The light in the relevant key goes out.
4. Remove KEY BLOCK card. The product key is now disabled.
 Disable all product keys Î Press [ ] key (display LED lights up).
 Several keys can be disabled simultaneously.
 Non-programmed product keys do not light up when the KEY BLOCK card is inserted
and cannot be disabled/enabled.
4.6.2.3. Enable keys
1. Insert KEY BLOCK card into the card reader.
2. All of the product keys which do not light up red are disabled:
lock buttons
select product
lock buttons
select product
PIN-Code 0000
` +/- ` ` Decaf `
ª