Payment Systems
Page 8-8 BASO-2 - 02.08 - V07
8. Delete another MONEY card Î Repeat steps 5-7. Back to menuÎ Insert LOAD card
into the card reader.
9. Press [ ] or [ ]
key to reach the next menu, remove LOAD card Î coffee machine
ready in payment mode.
8.2.1.2.5. Display total amount of credit loaded and reset (MONEY card)
1. Insert LOAD card into the card reader.
2. Press
[ ] or [ ]
key until the following menu is displayed:
=Total amount of credit loaded on all MONEY cards since
the last reset.
3. Press
[ ] key.
4. Press
[ ] key.
5. Press [ ] or [ ]
key to reach the next menu, remove LOAD card Î coffee machine
ready in payment mode.
8.2.1.2.6. Chip card info
It is possible to query card numbers (incremental and assigned by the manufacturer).
E.g. if a MONEY card is found, the card number enables the bearer to be identified,
on condition that the cards are registered when allocated.
1. Insert LOAD card into the card reader.
2. Press [
] or [ ]
key until the following menu is displayed:
3. Press
[ ] key.
4. Remove LOAD card.
5. Insert MONEY card into the card reader.
MONEY-A = Price group
YY = Transaction counter (no. of products served)
Card no. = Card no.
6. Remove MONEY card.
7. Load another MONEY card Î Insert next MONEY card. Back to menuÎ Insert
LOAD card into the card reader.
8. Press [
] or [ ]
key to reach the next menu, remove LOAD card Î coffee machine
ready in payment mode.
info MONEY-card
display ` Decaf `
remove card
insert card
MONEY / LOAD Æ
MONEY-A YY
Card-Nr. xxxx
delete MONEY-card
execute ‘ Decaf ’
load MONEY-card
sales 0.00
load MONEY-card
delete ? `Decaf `
loead MONEY-card
... Done ...
loead MONEY-card
sales 0.00
insert card
MONEY / LOAD -Æ
To Next Page
Loading...
Need help?
General
