User Instructions
BASO-2 - 02.04 - V07 Page 4-19
At the end of every menu:
Remove PROGRAM card Î coffee machine ready in normal operating mode.
Press [
] or [ ] key to reach the next menu.
4.6.1.2. Programmable security level
If the service engineer has programmed security levels 1 or 3 for the PROGRAM
card, the PIN code must be entered each time the coffee machine is used.
1. Insert PROGRAM card into the card reader:
2. Set the first digit of the PIN code using the [ ] and [ ] keys.
3. Confirm by pressing the [
] key.
4. Repeat steps 4 and 5 for each successive digit until the full PIN code is entered.
5. Press
[ ] or [ ] key to reach next menu, remove PROGRAM card Î coffee ma-
chine ready in normal operating mode.
Pressing the [ ] key accepts existing settings.
The PIN code is only activated if so programmed.
The current PIN code is not displayed.
4.6.1.3. Enable/disable payment mode
The licensed after sales service agent uses this function to enable or disable the pro-
grammed payment mode. It applies only to coffee machines connected to a payment
system.
1. Insert PROGRAM card into the card reader:
2.
Press
[ ] or [ ] until the following menu is displayed:
3. Toggle enable and disable by pressing the
[ ] key.
4. Press the
[ ] or [ ] key to reach next menu, remove PROGRAM card Î coffee
machine ready in normal operating mode.
4.6.1.4. Switch prices
If all values are set to zero, the switch price function is automatically disabled and
price level 1 activated.
1. Insert PROGRAM card into the card reader.
2. Press
[ ] or [ ] until the following menu is displayed
3. Press
[ ] key.
4. Enter the number before the decimal point by pressing the [ ] and [ ] keys (price 1
0-99).
PIN-Code 0000
` +/- ` ` Decaf Æ`
accounting mode
........
change price level
execute ` Decaf `
price – 1 00:00
ª
To Next Page
Loading...
