EasyManua.ls Logo

Schiller BP-200 plus - Page 29

Schiller BP-200 plus
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 29
Art. no.: 2.510701 rev.: c
Blood Pressure Measurement 4
User Guide Applying the Cuff 4.1
BP-200 plus
A cuff that is applied to a patient in the recumbent or sitting position is normally located
at the same level as the heart. However, if the cuff is located at a level higher than the
heart (for instance if the arm of a patient in bed is lifted), this may result in lower-than-
actual measurement readings (approx. 7.5 mmHg per 10 cm rise).
The pressure hose /microphone wire assembly can come from the upper (top) part
of the cuff, or from the bottom of the hose. The procedure to change to upper or lower
shown in the cuff cleaning section (see page 45)
The Oscilliometric version does not contain a microphone however, the cuff is placed
in the same manner.

Table of Contents