Page 43
Art. no.: 2.510701 rev.: c
Maintenance 6
User Guide Visual Inspection 6.2
BP-200 plus
6.2 Visual Inspection
Visually inspect the unit, cables, connectors, tubing, cuff and all sensors for the
following:
« Device casing not broken, cracked or damaged in any way.
« LCD screen not scratched, cracked or damaged in any way.
« No kinks, abrasion or wear in any tubing or cable assemblies.
« Pressure bladder, tube connector and velcro connector of the NIBP cuff in good
condition.
« No excessive soiling or damage.
« All sensor cable sheathing undamaged.
« All signal input sockets undamaged.
« Type plate on the rear of the unit readable.
« Keyboard and designation on the front of the unit readable
.
V Defective units, damaged cables, connectors, tubes or excessively soiled cuff
must be replaced immediately.
To Next Page
Loading...