4 Blood Pressure Measurement
4.2 Using the BP-200 plus in Standalone Mode
Page 32
BP-200 plus
Art. no.: 2.510701 rev.: c
4.2.3 Setup
Press the menu key and Select Setup Measurement (a).
Make the following settings for standalone use:
• Host System - None
• Trigger Mode:
– if ECG electrodes connected select Internal
– if ECG electrodes not connected select None
• Measurement Interval:
– if taking a stress test or wish to program a series of measurements, set the BP
recording interval (2-20 minutes)
– if you wish to take individual measurements as required, select Manual.
• Define all other settings according to circumstance and preference.
• Select Setup Limits (Optional) (b) and define limits according to preference.
MAIN MENU
SETUP SYSTEM
SETUP MEASUREMENTS
SETUP VIEW
SETUP LIMITS
DISPLAY MEASUREMENTS
STOP MEASUREMENTS
INFO SYSTEM
BACK
a
b
SETUP MEASUREMENTS
Host System
Trigger Mode
Meas Method
Beep Mode
Meas. Interval
Init. Pressure
Max. Initial Press.
Deflation Speed
BACK
SETUP LIMITS
SYS high
SYS Drop
Dia high
HR high
BACK
To Next Page
Loading...