Schiller BP-200 plus - Continuous Short Term Measurement; Ending Continuous Short Measurement

4 Blood Pressure Measurement
4.2 Using the BP-200 plus in Standalone Mode
Page 36
BP-200 plus
Art. no.: 2.510701 rev.: c
4.2.9 Continuous Short Term Measurement
4.2.10 Ending Continuous Short Measurement
V Repeated short term measurements can affect venous return and cause venous
congestion.
Press and hold the + key and press the Measurement key to take continuous
measurements (2 second interval between measurements), over a period of 15
minutes.
The mode is shown on the top left information line, and a count-down timer shows the
time that the continuous mode has left to run.
Press the Menu key and confirm that you wish to end the measurement sequence.