Schiller BP-200 plus - Technical Data; BP-200 Plus

Page 53
Art. no.: 2.510701 rev.: c
Technical Data 8
User Guide BP-200 plus 8.1
BP-200 plus
8 Technical Data
8.1 BP-200 plus
Manufacturer SCHILLER AG
Device Name
BP-200 plus
Option Integrated SpO2 module and ECG amplifier (to generate the QRS trigger signal for
reduced artefacts during stress testing)
Dimensions
222 x 155 x 96 mm (l x w x h)
Weight 1080 grams (including SpO2 module and ECG Amplifier, excluding backup
batteries)
LCD
Backlit graphical full colour LCD with multi-language menu
Power supply
Main
Backup Supply
External 9 Vdc, 1.7A(max), via hospital standard transformer
Four Type AA batteries (optional)
The unit is suitable for use in networks according to CISPR 11, Group 1, Class B
Memory
200 Measurements
Interfaces
RS-232
Trigger Input
USB
Mini SD card slot
Head phone Socket
Data transfer to / from host system
ECG trigger form host system (positive or negative)
USB interface
For SW update and additional storage of raw data
For verification of recording sound
Measurements
Methods of measurement
Primary
Secondary
Measuring range
Systolic
Diastolic
Heart rate
Deflation rate
Measurement Intervals
Host system
Standalone
Auscultatoric (Korotkoff/Riva-Rocci) with or without QRS trigger for stress testing
oscillometric with smooth linear deflation for resting measurements
50 ...270 mmHg (± 3mmHg)
20 ...150 mmHg (± 3mmHg)
40 ...250 bpm (40 ...100 bpm <
± 2%)
(100 ...200 bpm < ± 4%)
(200 ...250 bpm <
± 5%)
2 ...9 mmHg/s, automatic
On demand from host. Manual measurement interruption
Manual, or automatic (2 ...20 minute intervals)
QRS Trigger Primary from external ECG source (host system)
Secondary from optional BP-200 plus 4 lead patient cable