Schiller BP-200 plus - Page 54

8 Technical Data
8.1 BP-200 plus
Page 54
BP-200 plus
Art. no.: 2.510701 rev.: c
Standards
EN 1060-1, 1995
EN 1060-3, 1997
EN 1060-4, 2004
IEC 60601-2-30, 1999 /
EN 60601-2-30, 2000
AAMI/ANSI SP10, 2002
EN 60601-1
EN 60601-1-2
Non-invasive sphygmomanometers - Part 1 General requirement
Non-invasive sphygmomanometers - Part 3 Supplementary requirements for electromechan-
ical blood pressure measuring systems
Non-invasive sphygmomanometers. Part 4 Test procedures to determine the overall system
accuracy of automated non-invasive sphygmomanometers
Medical electrical equipment - Part 2-30 Particular requirements for the safety, including es-
sential performance, of automatic cycling non-invasive blood pressure monitoring equipment.
Manual, electronic or automated sphygmomanometers.
Medical electrical equipment - Part 1: General requirements for safety
Medical Electrical Equipment—Part 1: General Requirements for Safety, Amendment No. 2.
Collateral Standard: Electromagnetic Compatibility Requirements and Tests
Protection Class
1 according to IEC/EN60601-1 (internal power supply)
Applied Part BF / CF according to IEC / EN 60601-1
Conformity/classification
CE0123/IIa according Directive 93/42/EEC (medical devices)
Environmental conditions
Operating temperature
Storage temperature
Relative humidity
Pressure during operation
10 ... 40 °C
-10 ... 50 °C
25 ... 95 % (non condensing)
700 ... 1060 hPa