Schiller FRED easy - Page 61

Page 59
Versions 5
User Guide Configuration Ethernet/Online using FRECO 5.4
Art. no.: 0-48-0013 Rev. m
FRED easy
• Fill in the Server IP address field (9).
• Enter a login (10).
• Enter the password (11).
• Click the "Update" button (12) to apply any changes.
• Login (10) and password (11) can be freely changed but they must be the same as
those specified in the "SNMP Parameters" tab of LifeDataNet® (see user manuel
of LifeDataBox/LifeDataNet® (0-48-0117)). By default, the login is "fredeasy" and
the password is "schiller".
• To apply any changes to the parameters, click the "Update" button (12).
• Once the battery is inserted, FRED easy® Ethernet offers the option to manually
configure the IP addresses without using FREDCO®, if configured so.