Schiller FRED easy - Page 79

Page 77
Maintenance 7
User Guide Trouble Shooting 7.5
Art. no.: 0-48-0013 Rev. m
FRED easy
• The device is not able to con-
nect to the server
 Check the connection to the server, the net-
work configuration, and the LifeDataNet®
configuration, then restart data transmis-
sion; if the message is still displayed, the de-
vice must be repaired.
• The device is not able to con-
nect to the server
 Check the connection to the server, the net-
work configuration, and the LifeDataNet®
configuration, then restart data transmis-
sion; if the message is still displayed, the de-
vice must be repaired.
• The device is not able to con-
nect to the server
 Check the connection to the server, the net-
work configuration, and the LifeDataNet®
configuration, then restart data transmis-
sion; if the message is still displayed, the de-
vice must be repaired.
• The device is not able to con-
nect to the server
 Check the connection to the server, the net-
work configuration, and the LifeDataNet®
configuration, then restart data transmis-
sion; if the message is still displayed, the de-
vice must be repaired.
Error message Cause Remedy
TRANSMISSION FAILURE
ERROR CODE : 021
SUPERVISION START REQ
TRANSMISSION FAILURE
ERROR CODE : 022
SUPERVISION START ACK
TRANSMISSION FAILURE
ERROR CODE : 023
SUPERVISION STOP REQ
TRANSMISSION FAILURE
ERROR CODE : 024
SUPERVISION STOP ACK
• These errors are not applicable for the FRED easy® SD Card version.
• Error 004 (ADAPTER DISCONNECTED) only applies to the FRED easy® Ethernet
version.
• Errors 023 and 024 (SUPERVISION STOP REQ and SUPERVISION STOP ACK)
only apply to the FRED easy® Online version.