Schmalz SCPSi - Page 76

IO-Link Data Dictionary SCPSi series
21.10.01.00065/02 29.08.2014
J. Schmalz GmbH
Aacher Straße 29, D 72293 Glatten
Tel.: +49(0)7443/2403-0
Fax: +49(0)7443/2403-259
info@schmalz.de
dec hex

16 0x0010 15 bytes ro J. Schmalz GmbH Manufacturer designation
17 0x0011 15 bytes ro www.schmalz.com Internet address
18 0x0012 8 bytes ro SCPSi_V2 General product name
20 0x0014 30 bytes ro SCPSi 00 G2 NC M12-5 Order-Code
250 0x00FA Art 14 bytes ro 10.02.02.* Order-Nr.
251 0x00FB 2 bytes ro 00 Article revision
22 0x0016 2 bytes ro 03 Hardware revison
23 0x0017 SoC 4 bytes ro 2.01 Firmware revision
21 0x0015 Snr 9 bytes ro 000000001 Serial number
24 0x0018 0...32 bytes rw *** User string to store location or tooling information


12 0x000C 2 bytes 0 - 7 rw 0
Bit 0:parameter access lock (lock ISDU-write access)
Bit 1: data storage lock
Bit 2: local parameterization lock (lock menu editing)
77 0x004D Pin 2 bytes 0 - 999 rw 0
0 = menu editing unlocked
>0 = menu editing locked with pin-code

69 0x0045 bLo 1 byte 0 - 2 rw 0
0 = Externally controlled blow-off (-E-)
1 = Internally controlled blow-off – time-dependent (I-t)
2 = Externally controlled blow-off – time-dependent (E-t)
71 0x0047 o-2 1 byte 0 - 1 rw 0
0 = NO
1 = NC
73 0x0049 tyP 1 byte 0 - 1 rw 0
0 = PNP
1 = NPN
75 0x004B dLY 1 byte 0 - 3 rw 1
0 = Off
1 = 10ms
2 = 50ms
3 =200ms
74 0x004A uni 1 byte 0 - 2 rw 0
0 = mbar
1 = kPa
2 = inHg
Article number
Article revision
PIN code
Product name
Blow-off mode
Firmware revision
ISDU Index
Signal type
Device access locks
OUT2 function
Hardware revision
Product text
Serial number
Initial Setup
RemarkParameter Data width Value range Default valueAccess
Vacuum display unit
Output filter
Access Locks
Vendor text
Application specific tag
Vendor name
ISDU Parameters
(all ISDUs use subindex 0 only)
Identification
Parameter
Display
Appearance
J. Schmalz GmbH
3 of 11 SCPSi Data Dictionary