There are three options:
1. Charge only
2. Media device (MTP)
3. USB tethering
Charge only
By default the moment the phone is connected to the PC or MAC it will begin to charge. This
means that it will be in
“Charge only”
mode.
Media device (MTP)
If the need is to transfer files instead of charging, the instructions are:
• From Home Screen, press
OK Key
• Using the
Navigation key
, press
OK key
on
Tools & Settings.
• Using the
Navigation key
, press
OK Key
on
Settings
.
• Using the
Navigation key
, press
OK Key
on
Phone settings.
• Using the
Navigation key
, press
OK Key
on
USB mode.
• Using the
Navigation key
, select
“Media device (MTP)”
• Press
OK Key (Set)
The device will enter into Media device (MTP) mode and the PC will open up a root folder
showing the root hierarchy (folders) of the device.
USB tethering
When the mobile internet connection is shared with a connected computer by the device USB
Type-C cable, then it’s called USB Tethering. This option is used for a higher Internet speed
sharing connection versus a wireless hotspot option.
• From Home Screen, press
OK Key
• Using the
Navigation key
, press
OK key
on
Tools & Settings.
• Using the
Navigation key
, press
OK Key
on
Settings
.
• Using the
Navigation key
, press
OK Key
on
Phone settings.
• Using the
Navigation key
, press
OK Key
on
USB mode.
• Using the
Navigation key
, select
“USB tethering”
• Press
OK Key (Set)