SCHUNK SRU-plus Series - Protection During Commissioning and Operation; Protection against Dangerous Movements

Basic safety notes
16 14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443
Incorrect lifting of loads
Falling loads may cause serious injuries and even death.
l
Stand clear of suspended loads and do not step into their
swiveling range.
l
Never move loads without supervision.
l
Do not leave suspended loads unattended.
2.12.2 Protection during commissioning and operation
Falling or violently ejected components
Falling and violently ejected components can cause serious
injuries and even death.
l
Take appropriate protective measures to secure the danger
zone.
l
Never step into the danger zone during operation.
2.12.3 Protection against dangerous movements
Unexpected movements
Residual energy in the system may cause serious injuries while
working with the product.
l
Switch off the energy supply, ensure that no residual energy
remains and secure against inadvertent reactivation.
l
Never rely solely on the response of the monitoring function
to avert danger. Until the installed monitors become effective,
it must be assumed that the drive movement is faulty, with its
action being dependent on the control unit and the current
operating condition of the drive. Perform maintenance work,
modifications, and attachments outside the danger zone
defined by the movement range.
l
To avoid accidents and/or material damage, human access to
the movement range of the machine must be restricted. Limit/
prevent accidental access for people in this area due through
technical safety measures. The protective cover and protective
fence must be rigid enough to withstand the maximum
possible movement energy. EMERGENCY STOP switches must be
easily and quickly accessible. Before starting up the machine
or automated system, check that the EMERGENCY STOP system
is working. Prevent operation of the machine if this protective
equipment does not function correctly.